Course contentsShow
← Mathematics
Lesson 1695 of 3,12137. Applications of IntegrationFree lesson

Pumping Liquids from Tanks

Model work required to pump liquid out of containers by integrating over vertical slices.

Pumping Liquids from Tanks

What you'll learn: How to calculate the work required to pump liquid out of a container by integrating the work done on thin horizontal slices.

The Core Idea

When you pump water (or any liquid) out of a tank, you're doing work against gravity. The deeper the water, the more work required to lift it to the top. Here's the key insight: not all the liquid travels the same distance — water at the bottom must be lifted farther than water near the top.

To handle this varying distance, we slice the tank into thin horizontal layers (like pancakes stacked vertically). Each slice:

  • Has a small volume: ΔV ≈ A(y) Δy (cross-sectional area × thickness)
  • Has weight: ΔW = ρg · A(y) Δy (density × gravity × volume)
  • Must be lifted a distance d(y) to reach the outlet
  • Requires work: ΔWork = ρg · A(y) · d(y) · Δy

Setting Up the Integral

To find the total work, integrate over all slices from bottom to top:

W = ∫[a to b] ρg · A(y) · d(y) dy

Where:

  • y is the vertical position (height) of a slice
  • A(y) is the cross-sectional area at height y
  • d(y) is the distance that slice must travel
  • ρg is the weight density (for water: ≈ 62.4 lb/ft³ or 9800 N/m³)

The Process

  1. Choose coordinates with y measuring vertical height
  2. Find A(y), the area of a horizontal slice at height y
  3. Determine d(y), how far that slice must be lifted
  4. Set up and evaluate the integral

Key Takeaway: Work to pump liquids equals the integral of (weight density × cross-sectional area × lifting distance) over the tank's height, accounting for the fact that different layers travel different distances.