Washer Method: Identifying Outer and Inner Radii
You'll learn how to correctly identify which function forms the outer radius and which forms the inner radius when using the washer method.
The Core Idea
When rotating a region between two curves around an axis, you create a solid with a hole through it—like a donut or washer. The washer method calculates this volume by subtracting the volume of the inner hole from the outer solid.
The crucial skill is identifying which function is "farther" from the axis of rotation (the outer radius) and which is "closer" (the inner radius). This distance determines your radii.
How to Identify the Radii
For Rotation About the x-axis
- Outer radius R(x): The function that is higher up (larger y-value) from the x-axis
- Inner radius r(x): The function that is lower down (smaller y-value) from the x-axis
- Both measured as vertical distances from the x-axis
For Rotation About the y-axis
- Outer radius R(y): The function that is farther right (larger x-value) from the y-axis
- Inner radius r(y): The function that is closer left (smaller x-value) from the y-axis
- Both measured as horizontal distances from the y-axis
For Rotation About Other Horizontal or Vertical Lines
- Calculate the distance from each function to that line
- Outer radius: whichever function has the greater distance from the axis
- Inner radius: whichever function has the smaller distance from the axis
Quick Analogy
Think of it like racetracks around a central pole. The outer track (outer radius) is always farther from the pole than the inner track (inner radius). Distance from the axis is what matters, not which function appears "on top" in your original sketch.
Key Takeaway: The outer radius is always the function with the greater distance from the axis of rotation, and the inner radius is the function closer to that axis.