Course contentsShow
← Mathematics
Lesson 2317 of 3,12148. Ordinary Differential EquationsFree lesson

Applications: Mixing and Velocity Problems

Solve real-world problems involving tank mixing and objects moving with resistance.

Applications: Mixing and Velocity Problems

What You'll Learn

You'll learn how to model and solve real-world scenarios involving liquids mixing in tanks and objects moving through resistive media using separable differential equations.

The Core Idea

Many physical processes involve rates of change that depend on the current state. Two classic examples are:

  1. Mixing problems: Liquid enters a tank at some concentration, mixes instantly, and drains out. The concentration changes over time.
  2. Velocity with resistance: An object falls or moves through air/water where resistance is proportional to velocity.

Both scenarios lead to separable differential equations you can solve with the techniques you've learned.

Mixing Problems

Imagine a tank holding 100 liters of salt water. Fresh water enters, the mixture stirs instantly, and drains at the same rate. The rate of change of salt amount equals:

Rate of salt change = (salt in) − (salt out)

If A(t) is the amount of salt at time t, this becomes a differential equation. For example, if pure water enters at 5 L/min and the mixture drains at 5 L/min:

dA/dt = 0 − (A/100) · 5 = −A/20

This is separable! The salt exponentially decays: A(t) = A₀e^(−t/20).

Velocity with Resistance

When an object falls through air, gravity pulls down while air resistance pushes up proportional to velocity v:

m(dv/dt) = mg − kv

where k is a resistance constant. This separates into:

dv/(g − (k/m)v) = dt

Solving gives velocity approaching a terminal velocity of mg/k.

The Pattern

Both problems follow the same structure: identify what changes, write the rate equation, separate variables, integrate, and apply initial conditions.

Key Takeaway: Mixing and velocity problems translate real-world rate descriptions into separable ODEs—your job is to identify inflows, outflows, and resistance terms, then solve using separation of variables.