Course contentsShow
← Computer Science
Lesson 1456 of 2,87233. Networking FundamentalsFree lesson

Broadcast and Collision Domains

Defining broadcast domains where all devices receive broadcasts, and how switches segment collision domains.

Broadcast and Collision Domains

What you'll learn: You'll understand how switches organize network traffic into broadcast and collision domains to improve performance and efficiency.


What Is a Broadcast Domain?

A broadcast domain is a logical section of a network where any device can send a broadcast message that every other device in that domain will receive. When one computer sends a broadcast (like an ARP request asking "Who has IP address 192.168.1.5?"), all devices in the same broadcast domain hear it.

Think of it like shouting in a room—everyone in that room hears you, but people in other rooms don't.

By default, all devices connected to the same switch belong to one broadcast domain. Routers are what actually separate broadcast domains—broadcasts don't cross router boundaries.


What Is a Collision Domain?

A collision domain is a network segment where data packets can collide if two devices transmit simultaneously. Remember CSMA/CD from hubs? When devices share the same collision domain, they compete for access to the medium.

Here's the key difference switches make:

  • Hubs create one large collision domain—all ports share bandwidth and collisions happen.
  • Switches create a separate collision domain for each port. Each device gets dedicated bandwidth, and modern full-duplex switching eliminates collisions entirely.

Imagine a hub as a single-lane road where only one car can go at a time, versus a switch as a multi-lane highway where every car has its own lane.


How Switches Segment Networks

Switches intelligently forward frames only to the destination port (using their MAC address table), reducing unnecessary traffic. While they keep all ports in the same broadcast domain, they segment collision domains per port, dramatically improving network performance and eliminating the contention issues of shared hubs.

Key Takeaway: Switches create separate collision domains for each port (eliminating collisions), but all ports remain in one broadcast domain unless VLANs or routers are introduced.