Network Switches vs Hubs
What you'll learn: How switches intelligently direct traffic while hubs blindly broadcast everything.
The Fundamental Difference
Now that you understand MAC addresses and CSMA/CD, you need to know how devices connect within a local network. Both hubs and switches physically connect multiple devices, but they handle incoming frames very differently.
Hubs: The Broadcast Approach
A hub is a simple, unintelligent repeater. When a frame arrives on any port, the hub copies it to every other port indiscriminately. It doesn't examine MAC addresses or make decisions—it just floods everything everywhere.
Analogy: A hub is like shouting in a crowded room. Everyone hears your message, even if you only wanted to talk to one person.
Consequences:
- Creates one large collision domain
- Wastes bandwidth (irrelevant traffic reaches all devices)
- Poor security (everyone sees everyone else's frames)
- Relies entirely on CSMA/CD for access control
Switches: The Intelligent Approach
A switch maintains a MAC address table that maps addresses to physical ports. When a frame arrives, the switch:
- Reads the destination MAC address from the frame
- Looks it up in its table
- Forwards the frame only to the destination port
If the destination is unknown, the switch floods the frame (like a hub) but learns from the source MAC addresses it sees, building its table over time.
Benefits:
- Each port is a separate collision domain
- Better bandwidth utilization
- Improved security and privacy
- Enables full-duplex communication
Key Takeaway: Hubs blindly broadcast frames to all ports creating one collision domain, while switches intelligently forward frames only to the destination port, creating separate collision domains and dramatically improving network efficiency.