VPN Gateway Configuration
What You'll Learn
You'll learn how to configure the key components of a site-to-site VPN connection: cloud VPN gateways, customer gateways, and tunnel parameters that tie them together.
The Core Components
When establishing a site-to-site VPN between your on-premises network and a cloud provider, you're essentially building a secure bridge. This bridge has three critical pieces:
Cloud VPN Gateway: This is the cloud provider's end of the tunnel—a managed service that terminates your VPN connection in the cloud. You configure it with routing preferences (static or dynamic via BGP), IP addresses, and which VPC or virtual network it connects to.
Customer Gateway: This represents your on-premises VPN device or router. You register it with the cloud provider by providing its public IP address and routing type. Think of it as telling the cloud: "This is where my office network lives."
VPN Tunnel Configuration: The tunnel itself needs specific parameters:
- Encryption algorithms (AES-256, AES-128)
- Authentication methods (pre-shared keys, certificates)
- IKE (Internet Key Exchange) versions and settings
- Perfect Forward Secrecy (PFS) groups
- Dead Peer Detection (DPD) intervals to detect failed connections
Configuration Workflow
- Create the cloud VPN gateway in your target VPC/VNet
- Define your customer gateway with your on-prem device's public IP
- Create a VPN connection linking both gateways
- Configure tunnel parameters (encryption, authentication, lifetime values)
- Download configuration files for your on-premises device
- Apply routing (static routes or BGP peering)
Key Takeaway: VPN gateway configuration requires coordinating three elements—the cloud gateway, customer gateway definition, and secure tunnel parameters—to establish encrypted connectivity between your data center and cloud resources.