Route Table Verification
What you'll learn: How to analyze route tables and effective routes to diagnose where your traffic is actually going—and why it's not reaching its destination.
Understanding Route Tables
Route tables are like road maps for your network traffic. Every packet needs directions to reach its destination, and route tables provide those instructions. When traffic misdirects or mysteriously disappears, the route table is often the culprit—either missing entries, incorrect targets, or conflicting priorities.
Why Verification Matters
After configuring Security Groups and Network ACLs (concepts you've already mastered), traffic should flow—but doesn't. That's when you verify routes. Common issues include:
- Missing routes: No path defined to a subnet or external destination
- Incorrect targets: Traffic pointing to the wrong gateway, NAT device, or peering connection
- Route priority conflicts: More specific routes overriding your intended path
- Asymmetric routing: Traffic goes out one path but returns via another, breaking stateful firewalls
The Verification Process
Check the route table association: Confirm which route table is actually attached to your subnet. Default associations may surprise you.
Review route entries: Look at destination CIDR blocks and their targets. The most specific route (longest prefix match) always wins. A /32 route beats a /24, which beats a /16.
Trace effective routes: Cloud providers show which route will actually be used for a given destination IP. This reveals what the network actually does, not what you think it should do.
Validate propagation: If using dynamic routing (BGP) or route propagation from VPN/transit gateways, ensure routes are appearing as expected.
Key Takeaway: Route table verification means confirming the actual path traffic will take by examining route entries, priorities, and associations—turning "why isn't this working?" into "ah, traffic is going there instead."