Course contentsShow
← System Design
Lesson 1437 of 1,91935. Backup and Disaster RecoveryFree lesson

Failover and Failback Procedures

Define automated and manual procedures for switching to DR site and safely returning to primary operations.

Failover and Failback Procedures

You'll learn how systems automatically or manually switch to a disaster recovery site during outages and safely return to primary operations afterward.

What Are Failover and Failback?

Failover is the process of switching operations from your primary site to a disaster recovery (DR) site when the primary becomes unavailable. Failback is the reverse—returning operations from the DR site back to the restored primary site.

Think of it like a backup power generator: when the main power fails, the generator kicks in (failover). When main power is restored, you switch back (failback)—but you can't just flip it instantly or you might cause damage.

Automated vs Manual Failover

Automated failover uses health checks and monitoring to detect failures and trigger the switch without human intervention. This minimizes RTO but requires sophisticated detection to avoid false positives (like the split-brain problem you've learned).

Manual failover requires human judgment to initiate the switch. It's slower but reduces risks of unnecessary failovers during transient issues.

The Failover Process

  1. Detection: Health checks identify primary site failure
  2. Decision: Automated system or on-call engineer decides to fail over
  3. DNS/traffic routing: Update routes to point to DR site
  4. Activation: Promote read replicas, restore from backups if needed
  5. Verification: Confirm DR site is handling traffic correctly

The Failback Challenge

Failback is riskier than failover. Your primary site must be fully repaired, data synchronized from DR, and you need to coordinate the switch without data loss. Many teams schedule failback during maintenance windows, treating it like a controlled migration rather than an emergency procedure.

Key Takeaway: Failover and failback procedures define how you switch between primary and DR sites—automated approaches minimize RTO, while careful failback planning prevents data loss and ensures safe return to normal operations.