Course contentsShow
← Mathematics
Lesson 974 of 3,12123. Right Triangle TrigonometryFree lesson

Setting Up Right Triangle Problems from Word Descriptions

Learn to identify the right triangle, label sides relative to the angle of interest, and choose the correct trig ratio.

Setting Up Right Triangle Problems from Word Descriptions

You'll learn how to turn a real-world word problem into a labeled right triangle diagram with the correct trig ratio identified.

The Core Challenge

When you read a problem like "A 15-foot ladder leans against a wall, making a 70° angle with the ground. How high does it reach?", your first job isn't to calculate—it's to translate the words into geometry. You need to:

  1. Recognize the right triangle (the ground, wall, and ladder form one)
  2. Label the sides relative to the given angle (opposite, adjacent, hypotenuse)
  3. Choose the correct trig ratio (sine, cosine, or tangent)

Step-by-Step Setup Process

1. Sketch and Mark the Right Angle

Draw your triangle. Identify where the 90° angle is—usually where two perpendicular elements meet (ground and wall, horizontal and vertical lines).

2. Label the Given Angle

Mark the angle you're working from. In our ladder example, that's the 70° angle at the base.

3. Identify Sides Relative to That Angle

  • Hypotenuse: The longest side, opposite the right angle (the ladder = 15 ft)
  • Opposite: The side across from your angle (the height up the wall = unknown)
  • Adjacent: The side touching your angle (ground distance)

4. Pick Your Ratio

You have the hypotenuse (15) and want the opposite (height). That means you need sine: sin(70°) = opposite/hypotenuse.

Think Like a Translator

Setting up problems is like translating languages: the word problem is in English, but you need to "speak" in triangles and trig ratios. The diagram is your dictionary.

Key Takeaway: Setting up right triangle problems means identifying the right triangle in the scenario, labeling opposite/adjacent/hypotenuse from the angle of interest, and selecting sine, cosine, or tangent based on which two sides you're working with.