Course contentsShow
← Mathematics
Lesson 1759 of 3,12138. Sequences and Series (Calculus)Free lesson

Choosing the Right Test for Alternating Series

Develop a strategy to first test absolute convergence with ratio/comparison tests, then apply alternating series test if needed.

Choosing the Right Test for Alternating Series

What you'll learn: You'll develop a systematic strategy for determining convergence of alternating series by testing absolute convergence first, then applying the alternating series test when needed.

The Strategic Approach

When faced with an alternating series, don't jump straight to the Alternating Series Test. Instead, follow this two-stage strategy:

Stage 1: Test for Absolute Convergence

First, remove the alternating signs and examine the series of absolute values. Apply your arsenal of tests for positive-term series:

  • Ratio Test: Best for factorials, exponentials, or powers of n
  • Comparison Tests: Effective when terms resemble known series (geometric, p-series)
  • Root Test: Useful for nth powers

If the absolute series converges, you're done—the original alternating series converges absolutely (which is stronger than mere convergence).

Stage 2: Apply the Alternating Series Test

If absolute convergence fails (the test shows divergence or is inconclusive), then check the Alternating Series Test conditions:

  • Terms decrease in absolute value: |aₙ₊₁| ≤ |aₙ|
  • Terms approach zero: lim(n→∞) aₙ = 0

If both hold, the series converges conditionally.

Why This Order Matters

Think of it like diagnosing an illness: run the broad, powerful tests first (absolute convergence), then move to specialized tests (alternating series test). Absolute convergence is a stronger property and often easier to verify using familiar tools. The alternating series test is your backup when absolute convergence fails but the series still converges due to cancellation between positive and negative terms.

Key Takeaway: Always test alternating series for absolute convergence first using ratio, comparison, or root tests; only apply the alternating series test if absolute convergence fails or is inconclusive.