Coterminal Angles and Periodicity
What You'll Learn
You'll discover why angles that differ by full rotations (360° or 2π radians) produce identical trigonometric values—a property called periodicity.
The Core Idea
Imagine walking around a circular track. Whether you complete one lap or three laps, you end up at the same spot. Angles work the same way on the unit circle!
Coterminal angles are angles that share the same terminal side—they point in the exact same direction. You create coterminal angles by adding or subtracting full rotations:
- In degrees: add or subtract 360°
- In radians: add or subtract 2π
For example:
- 45° and 405° are coterminal (405° = 45° + 360°)
- 30° and -330° are coterminal (30° = -330° + 360°)
- π/4 and 9π/4 are coterminal (9π/4 = π/4 + 2π)
Why This Matters: Periodicity
Because coterminal angles land on the same point on the unit circle, they have identical coordinates. This means:
- sin(θ) = sin(θ + 360°) = sin(θ + 720°) = ...
- cos(θ) = cos(θ + 2π) = cos(θ + 4π) = ...
- tan(θ) = tan(θ + 180°) [tangent repeats every 180° or π]
This repeating behavior is called periodicity. Sine and cosine repeat every full rotation, while tangent repeats every half-rotation (since opposite points on the unit circle give the same tangent ratio).
Practical Use
If asked to find sin(765°), you can subtract 720° (two full rotations) to get sin(45°), which equals √2/2.
Key Takeaway: Angles differing by complete rotations (360° or 2π) are coterminal and produce identical trigonometric values—this fundamental property is called periodicity.