Course contentsShow
← Machine Learning and Deep Learning
Lesson 2630 of 3,53857. Model Compression: QuantizationFree lesson

Measuring Quantization Quality

Metrics for quantization evaluation: accuracy drop, signal-to-quantization-noise ratio, and layer-wise analysis.

Measuring Quantization Quality

You'll learn how to evaluate whether your quantized model is "good enough" using three key metrics.

The Challenge

After quantizing a model, you need to know: Did I break it? Just like compressing a photo, you want to verify the quality loss is acceptable before deploying your smaller, faster model.

Three Essential Metrics

1. Accuracy Drop

The most direct measure: compare your quantized model's accuracy to the original full-precision baseline.

Example: If your FP32 model has 92% accuracy and your INT8 version has 90%, you have a 2% accuracy drop. Typically, drops under 1-2% are considered acceptable for deployment.

2. Signal-to-Quantization-Noise Ratio (SQNR)

Borrowed from signal processing, SQNR measures how much "noise" quantization introduced relative to the original signal strength. Higher SQNR means better quality.

Analogy: Like measuring static on a phone call—more decibels means clearer audio. SQNR helps you diagnose quality issues before running expensive end-to-end tests.

SQNR is calculated as: the ratio of original signal power to quantization error power (typically in dB).

3. Layer-Wise Analysis

Not all layers tolerate quantization equally! Some layers are sensitive (early conv layers, attention heads), while others compress well.

Strategy: Compute SQNR or output differences per layer. If layer 5 shows huge degradation, you might keep it in FP16 while quantizing others to INT8—this is mixed precision quantization in action.

Key Takeaway: Measure quantization quality through accuracy drop (end-to-end validation), SQNR (signal quality per layer), and layer-wise analysis (identify problematic layers)—together they tell you whether your compression preserves what matters.