Course contentsShow
← Machine Learning and Deep Learning
Lesson 2436 of 3,53853. Speech and Audio ProcessingFree lesson

Time-Domain Waveform Representation

Working with raw audio as amplitude-over-time sequences and basic waveform operations in NumPy.

Time-Domain Waveform Representation

You'll learn how to represent and manipulate raw audio signals as sequences of amplitude values over time using NumPy.

What Is Time-Domain Representation?

When you work with audio in machine learning, the most fundamental representation is the time-domain waveform—simply a sequence of amplitude values sampled at regular intervals. Think of it like a list of numbers where each number tells you how far the speaker membrane was pushed at that instant. If you sampled at 16,000 Hz, you get 16,000 amplitude measurements per second.

This is "raw" audio: no frequencies, no spectrograms yet—just amplitude over time.

Working with Waveforms in NumPy

After loading audio (which we've covered conceptually), you'll have a NumPy array where:

  • Each element represents the amplitude at one sample point
  • The array index represents time (index 0 = time 0, index 16000 = 1 second at 16kHz)
  • Values typically range from -1.0 to +1.0 (normalized) or use integer ranges based on bit depth

Basic operations you can perform:

  • Slicing: Extract a segment (e.g., waveform[16000:32000] gets the second second)
  • Amplitude scaling: Multiply by a constant to make louder/quieter
  • Concatenation: Join audio clips using np.concatenate()
  • Silence detection: Find where np.abs(waveform) < threshold
  • Duration calculation: len(waveform) / sample_rate gives you seconds

Think of the waveform array like a movie frame-by-frame—except instead of images, each "frame" is just one amplitude measurement.

Key Takeaway: Time-domain waveform representation stores audio as a 1D NumPy array of amplitude values sampled over time, enabling direct manipulation through array operations like slicing, scaling, and concatenation.