Capacity Planning for High Availability
What you'll learn: How to provision excess capacity strategically to absorb failovers and traffic spikes without compromising system availability.
Why Capacity Planning Matters for HA
Even the most resilient architecture fails if you lack the resources to handle additional load during a failover event. Capacity planning for high availability means intentionally over-provisioning resources so your system can gracefully absorb:
- Failover scenarios – When one availability zone or region goes down, surviving infrastructure must handle 100% of the traffic
- Traffic spikes – Unexpected load increases shouldn't trigger cascading failures
- Degraded state operations – Systems running with reduced capacity still meet SLAs
The N+1 and N+2 Principles
Think of capacity planning like a highway during rush hour. If you design for exactly the current traffic, a single lane closure causes gridlock. High availability demands headroom.
N+1 redundancy means having one extra unit beyond minimum requirements. If you need 3 servers at peak load, run 4.
N+2 redundancy adds two extra units, protecting against simultaneous failures in multiple fault domains.
Practical Considerations
- Reserve capacity in each availability zone – If you run across 3 zones, each should handle 50% of total load (not just 33%), so losing one zone doesn't overload survivors
- Auto-scaling headroom – Pre-warm instances or use predictive scaling to avoid cold-start delays during sudden demand
- Database read replicas – Maintain extra replicas so promoting one to primary doesn't eliminate all redundancy
- Connection pool sizing – Over-provision connection limits to handle retry storms during partial outages
The Cost-Availability Tradeoff
More capacity costs more money. Balance business requirements (RTO/RPO, availability SLA) against budget. Critical systems justify higher overhead percentages.
Key Takeaway: High availability requires intentional over-provisioning—design each fault domain to handle significantly more than its normal share of load, ensuring graceful operation when redundancy is lost.