Course contentsShow
← AI Engineering
Lesson 1358 of 1,88633. Parameter-Efficient Fine-Tuning (PEFT)Free lesson

LoRA Training Best Practices

Choosing appropriate rank values, learning rates, batch sizes, and monitoring convergence for successful PEFT.

LoRA Training Best Practices

What you'll learn: How to choose the right hyperparameters and monitor training to get the best results from your LoRA fine-tuning runs.

Finding the Sweet Spot

After learning what LoRA is and how to implement it, success depends on choosing sensible values and watching your training closely. Think of it like tuning a musical instrument—you need the right tension (rank), the right touch (learning rate), and you need to listen for when it sounds right (convergence monitoring).

Critical Hyperparameter Choices

Rank Selection: Start with r=8 or r=16 for most tasks. Higher ranks (32, 64) offer more capacity but reduce efficiency gains. Monitor validation loss—if it plateaus early, try increasing rank. If you overfit quickly, decrease it.

Learning Rate: LoRA adapters typically train well with learning rates higher than full fine-tuning, often 1e-4 to 5e-4. Since you're training fewer parameters, you can afford to be more aggressive. Use a cosine or linear scheduler to gradually decrease it.

Batch Size: Smaller effective batch sizes (2-8 per device with gradient accumulation) often work well, especially with QLoRA on limited hardware. Larger batches stabilize training but require more memory.

Monitoring Convergence

Watch your training and validation loss curves closely. LoRA often converges faster than full fine-tuning (hundreds to a few thousand steps). Look for:

  • Diverging train/val loss (overfitting → lower rank or more regularization)
  • Both losses plateauing (convergence or need higher rank)
  • Unstable loss spikes (learning rate too high)

Save checkpoints frequently and evaluate on held-out examples, not just metrics.

Key Takeaway: Start conservative (r=8-16, lr=1e-4, small batches), monitor train/validation divergence closely, and iterate based on actual model outputs—LoRA's efficiency lets you experiment quickly.